Send Email
Send SMS
Search
Innovative Flexotech Pvt. Ltd
Innovative Flexotech Pvt. Ltd


Solvent Distillation Unit

@flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
Special Features Solvent recovery unit for photopolymer flexo plates

A. General description:

This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

B. Technical information:

Recovery volume : 60 / 80 liters
Power consume: 220V 4.65KW
Diathermic oil : 23 KG
Machine dimension: Main body: 1100x 780x1200 mm
Recovery rate: 85%
Recovery time : 3 ~ 4 hours

 

C. Operating steps:

1. After opening the crate, plug in 220 V power, and connect the ground (earth).
2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
3. Close the lid and tighten it.
4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

D. Important:

1. Install the unit in a wide and ventilated place.
2. Disconnect electric power before doing any action.
3. No taking off the control panel
4. Change the diathermic oil every 1000 working hours.
5. No filling the solvent container up over the level (80 liters)
6. Remove the waste after every recovery process


Solvent Distillation Machine

REQUEST CALLBACK

Solvent Distillation Machine
  • Solvent Distillation Machine
  • Solvent Distillation Machine
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 9.5 Lakh / UnitGet Latest Price

Product Details:
Minimum Order Quantity1 Unit
Brand/MakeInnovative FlexoTech Pvt.Ltd.
Design TypeStandard

Special Features Solvent Recovery Unit For photo polymer flexo plates.

A. General description: 30L-RHB
is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

B. Technical information:
Recovery volume :30 liters
Power consume : 220V 3. 65kw
Diathermic oil : 20 KG
Machine dimension : 960x 610x 9400 mm
Main body Recovery rate : 85%

C. Operating steps:
After opening the crate, plug in 220 V power, and connect the ground (earth). Open the lid and fill the tank up to the level with solvent to be recovered (30 L).Close the lid and tighten it.Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1). Set up the thermostat (18) for example for Perc. Is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure (3) high at 0. 03 Mpa / low at 0. 01mpa, and steam cooling fan thermostat (11) at 40 degree C. Turn on the power switch (15) , steam cooling switch (16) , heater switch (17) and vacuum pump switch (12). If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

D. Important:
Install the unit in a wide and ventilated place. Disconnect electric power before doing any action.No taking off the control panel. Change the diathermic oil every 1000 working hours. No filling the solvent container up over the level (30 liters). Remove the waste after every recovery

Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Distillation Unit

    REQUEST CALLBACK

    Solvent Distillation Unit
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 11.5 Lakh / UnitGet Latest Price

    Product Details:
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    Solvent Recovery 80

    Special Features:Solvent recovery unit for photopolymer flexo plates

     

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

     

    B. Technical information:

    Recovery Volume: 80 Liter

    Power Consume: 220v AC, 5.65Kw

    Dia Thermic Oil: 33 kg.

    Machine Dimention Machine Boady: 1300mm x 880mm x 1300mm

    Recovery Rate: 85%

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).

    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)

    3. Close the lid and tighten it.

    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1).

    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.

    6. Turn on the power switch (15), steam cooling switch (16), heater switch (17) and vacuum pump switch (12).

    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

     

    D. Important:

    1. Install the unit in a wide and ventilated place.

    2. Disconnect electric power before doing any action.

    3. No taking off the control panel

    4. Change the diathermic oil every 1000 working hours.

    5. No filling the solvent container up over the level (80 liters)

    6. Remove the waste after every recovery process

    ·         : 30 ltr

    Specifications

    B. Technical information: 
    Recovery volume : 60 / 80 liters 
    Power consume: 220V 4.65KW 
    Diathermic oil : 23 KG 
    Machine dimen 

    Yes! I am Interested

    Cleaning Solvent Distillation Unit

    REQUEST CALLBACK

    Cleaning Solvent Distillation Unit
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 11.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative flexoTech Pvt.Ltd.
    Design TypeStandard

    Solvent Recovery 80

    Special Features:Solvent recovery unit for photopolymer flexo plates

     

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery Volume: 80 Liter

    Power Consume: 220v AC, 5.65Kw

    Dia Thermic Oil: 33 kg.

    Machine Dimention Machine Boady: 1300mm x 880mm x 1300mm

    Recovery Rate: 85%

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).

    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)

    3. Close the lid and tighten it.

    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1).

    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.

    6. Turn on the power switch (15), steam cooling switch (16), heater switch (17) and vacuum pump switch (12).

    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

     

    D. Important:

    1. Install the unit in a wide and ventilated place.

    2. Disconnect electric power before doing any action.

    3. No taking off the control panel

    4. Change the diathermic oil every 1000 working hours.

    5. No filling the solvent container up over the level (80 liters)

    6. Remove the waste after every recovery process

    · : 30 ltr

    Specifications

    B. Technical information:
    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimen


    Additional Information:

  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Recycling System

    REQUEST CALLBACK

    Solvent Recycling System
    • Solvent Recycling System
    • Solvent Recycling System
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 8.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process

     

     

     

     

     

     

     

     

     

     

     

     

     


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Recycling Machine 30,60 ltr

    REQUEST CALLBACK

    Solvent Recycling Machine 30,60 ltr
    • Solvent Recycling Machine 30,60 ltr
    • Solvent Recycling Machine 30,60 ltr
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Capacity100

    Special Features:Solvent recovery unit for photopolymer flexo plates

     

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery Volume: 80 Liter

    Power Consume: 220v AC, 5.65Kw

    Dia Thermic Oil: 33 kg.

    Machine Dimention Machine Boady: 1300mm x 880mm x 1300mm

    Recovery Rate: 85%

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).

    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)

    3. Close the lid and tighten it.

    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1).

    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.

    6. Turn on the power switch (15), steam cooling switch (16), heater switch (17) and vacuum pump switch (12).

    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

     

    D. Important:

    1. Install the unit in a wide and ventilated place.

    2. Disconnect electric power before doing any action.

    3. No taking off the control panel

    4. Change the diathermic oil every 1000 working hours.

    5. No filling the solvent container up over the level (80 liters)

    6. Remove the waste after every recovery process

    · : 30 ltr

    Specifications

    B. Technical information:
    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimen

    Power Consumption:100 Units/Unit per Month


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Recycling Machine

    REQUEST CALLBACK

    Solvent Recycling Machine
    • Solvent Recycling Machine
    • Solvent Recycling Machine
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    Special Features:Solvent recovery unit for photopolymer flexo plates

     

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery Volume: 80 Liter

    Power Consume: 220v AC, 5.65Kw

    Dia Thermic Oil: 33 kg.

    Machine Dimention Machine Boady: 1300mm x 880mm x 1300mm

    Recovery Rate: 85%

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).

    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)

    3. Close the lid and tighten it.

    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1).

    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.

    6. Turn on the power switch (15), steam cooling switch (16), heater switch (17) and vacuum pump switch (12).

    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

     

    D. Important:

    1. Install the unit in a wide and ventilated place.

    2. Disconnect electric power before doing any action.

    3. No taking off the control panel

    4. Change the diathermic oil every 1000 working hours.

    5. No filling the solvent container up over the level (80 liters)

    6. Remove the waste after every recovery process

    · : 30 ltr

    Specifications

    B. Technical information:
    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimen


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Cleaning Solvent Distillation Unit

    REQUEST CALLBACK

    Cleaning Solvent Distillation Unit
    • Cleaning Solvent Distillation Unit
    • Cleaning Solvent Distillation Unit
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 9.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Automatic GradeAutomatic
    Design TypeStandard

    Special Features:Solvent recovery unit for photopolymer flexo plates

     

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery Volume: 80 Liter

    Power Consume: 220v AC, 5.65Kw

    Dia Thermic Oil: 33 kg.

    Machine Dimention Machine Boady: 1300mm x 880mm x 1300mm

    Recovery Rate: 85%

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).

    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)

    3. Close the lid and tighten it.

    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1).

    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.

    6. Turn on the power switch (15), steam cooling switch (16), heater switch (17) and vacuum pump switch (12).

    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

     

    D. Important:

    1. Install the unit in a wide and ventilated place.

    2. Disconnect electric power before doing any action.

    3. No taking off the control panel

    4. Change the diathermic oil every 1000 working hours.

    5. No filling the solvent container up over the level (80 liters)

    6. Remove the waste after every recovery process

    · : 30 ltr

    Specifications

    B. Technical information:
    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimen


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Recovery Equipment

    REQUEST CALLBACK

    Solvent Recovery Equipment
    • Solvent Recovery Equipment
    • Solvent Recovery Equipment
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 6.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    Special Features:Solvent recovery unit for photopolymer flexo plates

     

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery Volume: 80 Liter

    Power Consume: 220v AC, 5.65Kw

    Dia Thermic Oil: 33 kg.

    Machine Dimention Machine Boady: 1300mm x 880mm x 1300mm

    Recovery Rate: 85%

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).

    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)

    3. Close the lid and tighten it.

    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1).

    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.

    6. Turn on the power switch (15), steam cooling switch (16), heater switch (17) and vacuum pump switch (12).

    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

     

    D. Important:

    1. Install the unit in a wide and ventilated place.

    2. Disconnect electric power before doing any action.

    3. No taking off the control panel

    4. Change the diathermic oil every 1000 working hours.

    5. No filling the solvent container up over the level (80 liters)

    6. Remove the waste after every recovery process

    · : 30 ltr

    Specifications

    B. Technical information:
    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimen


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crate,Export Packaging
  • Yes! I am Interested

    Solvent Recovery Machines

    REQUEST CALLBACK

    Solvent Recovery Machines
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4.5 Lakh / UnitGet Latest Price

    Product Details:
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process

    Yes! I am Interested

    Solvent Dispenser System

    REQUEST CALLBACK

    Solvent Dispenser System
    • Solvent Dispenser System
    • Solvent Dispenser System
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 2.25 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Distillation

    REQUEST CALLBACK

    Solvent Distillation
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 9.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative Flexotech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters 
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG 
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth). 
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it. 
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters) 
    6. Remove the waste after every recovery process


    Additional Information:

  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Recovery Machines

    REQUEST CALLBACK

    Solvent Recovery Machines
    • Solvent Recovery Machines
    • Solvent Recovery Machines
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Recovery Equipment

    REQUEST CALLBACK

    Solvent Recovery Equipment
    • Solvent Recovery Equipment
    • Solvent Recovery Equipment
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 6.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process

     

     

     

     

     

     


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crate,Export Packaging
  • Yes! I am Interested

    Cleaning Solvent Distillation Unit

    REQUEST CALLBACK

    Cleaning Solvent Distillation Unit
    • Cleaning Solvent Distillation Unit
    • Cleaning Solvent Distillation Unit
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 11.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process

     

     

     

     

     

     


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Recycling Machine

    REQUEST CALLBACK

    Solvent Recycling Machine
    • Solvent Recycling Machine
    • Solvent Recycling Machine
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process

     

     

     

     

     

     


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Distillation Unit

    REQUEST CALLBACK

    Solvent Distillation Unit
    • Solvent Distillation Unit
    • Solvent Distillation Unit
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 11.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process

     

     

     

     

     

     


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Cleaning Solvent Distillation Unit

    REQUEST CALLBACK

    Cleaning Solvent Distillation Unit
    • Cleaning Solvent Distillation Unit
    • Cleaning Solvent Distillation Unit
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 11.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process

    Automatic Grade:Automatic

     

     

     

     


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Recycling Machine

    REQUEST CALLBACK

    Solvent Recycling Machine
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4.5 Lakh / UnitGet Latest Price

    Product Details:
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters 
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG 
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth). 
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it. 
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters) 
    6. Remove the waste after every recovery process

     

     

     

     

     

    Yes! I am Interested

    Solvent Distillation Unit

    REQUEST CALLBACK

    Solvent Distillation Unit
    • Solvent Distillation Unit
    • Solvent Distillation Unit
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 9.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process

     

     

     

     

     


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Recovery Systems

    REQUEST CALLBACK

    Solvent Recovery Systems
    • Solvent Recovery Systems
    • Solvent Recovery Systems
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4.5 Lakh / UnitGet Latest Price

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process

     

    Brand/Make:Innovative FlexoTech Pvt.Ltd.


    Design Type:Standard

     

     

     

     

     


    Additional Information:

  • Minimum Order Quantity: 1 Unit
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crate,Export Packaging
  • Yes! I am Interested

    Solvent Dispenser System

    REQUEST CALLBACK

    Solvent Dispenser System
    • Solvent Dispenser System
    • Solvent Dispenser System
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process

     

     

     

     

     


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Dispenser System

    REQUEST CALLBACK

    Solvent Dispenser System
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 2.25 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Automatic GradeAutomatic
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters 
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG 
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth). 
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it. 
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters) 
    6. Remove the waste after every recovery process

     

     

     

     

     


    Additional Information:

  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    30 LTR Solvent Recovery System

    REQUEST CALLBACK

    30 LTR Solvent Recovery System
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4.5 Lakh / Unit(s)Get Latest Price

    Recovery Volume : 30

    Power Consumption : 220v AC, 3.65Kw

    Dia Thermic Oil : 20 kg.

    Machine Dimention Machine Body : 960mm x 610mm x 940mm

    Recovery Rate : 85%


    Additional Information:

  • Minimum Order Quantity: 1 Unit(s)
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Western Union
  • Port of Dispatch: Ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    100 LTR Solvent Recovery Equipment

    REQUEST CALLBACK

    100 LTR Solvent Recovery Equipment
    • 100 LTR Solvent Recovery Equipment
    • 100 LTR Solvent Recovery Equipment
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 5.6 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    Recovery Volume : 100

    Power Consumption : 220v AC, 6.65Kw

    Dia Thermic Oil : 40 kg.

    Machine Dimension Machine Body : 1500mm x 980mm x 1500mm

    Recovery Rate : 85%


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    200 LTR Solvent Recovery Equipment

    REQUEST CALLBACK

    200 LTR Solvent Recovery Equipment
    • 200 LTR Solvent Recovery Equipment
    • 200 LTR Solvent Recovery Equipment
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 14.3 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    Recovery Volume : 200

    Power Consumption : 220v AC , 10Kw

    Dia Thermic Oil : 80 kg.

    Machine Dimension Machine Body : 2500mm x 1700mm x 2300mm

    Recovery Rate : 85%


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Recycling Machine 30,60,80,100,200

    REQUEST CALLBACK

    Recycling Machine 30,60,80,100,200
    • Recycling Machine 30,60,80,100,200
    • Recycling Machine 30,60,80,100,200
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Minimum Order Quantity1 Set
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Capacity30, 60, 80, 100, 200
    Design TypeStandard

    Special Features:Solvent recovery unit for photopolymer flexo plates

     

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery Volume: 80 Liter

    Power Consume: 220v AC, 5.65Kw

    Dia Thermic Oil: 33 kg.

    Machine Dimention Machine Boady: 1300mm x 880mm x 1300mm

    Recovery Rate: 85%

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).

    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)

    3. Close the lid and tighten it.

    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1).

    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.

    6. Turn on the power switch (15), steam cooling switch (16), heater switch (17) and vacuum pump switch (12).

    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

     

    D. Important:

    1. Install the unit in a wide and ventilated place.

    2. Disconnect electric power before doing any action.

    3. No taking off the control panel

    4. Change the diathermic oil every 1000 working hours.

    5. No filling the solvent container up over the level (80 liters)

    6. Remove the waste after every recovery process

    · : 30 ltr

    Specifications

    B. Technical information:
    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimen


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    View PDF

    Solvent Distillation Unit

    REQUEST CALLBACK

    Solvent Distillation Unit
    • Solvent Distillation Unit
    • Solvent Distillation Unit
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    Special Features: Solvent recovery unit for photopolymer flexo plates

     

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

     

    B. Technical information:

    Recovery Volume: 80 Liter

    Power Consume: 220v AC, 5.65Kw

    Dia Thermic Oil: 33 kg.

    Machine Dimention Machine Boady: 1300mm x 880mm x 1300mm

    Recovery Rate: 85%

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).

    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)

    3. Close the lid and tighten it.

    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1).

    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.

    6. Turn on the power switch (15), steam cooling switch (16), heater switch (17) and vacuum pump switch (12).

    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

     

    D. Important:

    1. Install the unit in a wide and ventilated place.

    2. Disconnect electric power before doing any action.

    3. No taking off the control panel

    4. Change the diathermic oil every 1000 working hours.

    5. No filling the solvent container up over the level (80 liters)

    6. Remove the waste after every recovery process

    · : 30 ltr

    Specifications

    B. Technical information:
    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimen


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Recycler

    REQUEST CALLBACK

    Solvent  Recycler
    • Solvent  Recycler
    • Solvent  Recycler
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Minimum Order Quantity1 Set
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    @flexo 30L - RHB / @flexo 60L-RHB / @flexo 80L-RHB / @flexo 100L-RHB / @flexo 200L-RHB
    Special Features Solvent recovery unit for photopolymer flexo plates

    A. General description:

    This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:

    Recovery volume : 60 / 80 liters
    Power consume: 220V 4.65KW
    Diathermic oil : 23 KG
    Machine dimension: Main body: 1100x 780x1200 mm
    Recovery rate: 85%
    Recovery time : 3 ~ 4 hours

     

    C. Operating steps:

    1. After opening the crate, plug in 220 V power, and connect the ground (earth).
    2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
    3. Close the lid and tighten it.
    4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
    5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
    6. Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
    7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).

    D. Important:

    1. Install the unit in a wide and ventilated place.
    2. Disconnect electric power before doing any action.
    3. No taking off the control panel
    4. Change the diathermic oil every 1000 working hours.
    5. No filling the solvent container up over the level (80 liters)
    6. Remove the waste after every recovery process

     

     

     

     

     


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    View PDF

    60 LTR Solvent Distillation Unit

    REQUEST CALLBACK

    60 LTR Solvent Distillation Unit
    • 60 LTR Solvent Distillation Unit
    • 60 LTR Solvent Distillation Unit
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4.5 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    80 LTR Solvent Distillation Unit

    REQUEST CALLBACK

    80 LTR Solvent Distillation Unit
    • 80 LTR Solvent Distillation Unit
    • 80 LTR Solvent Distillation Unit
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 6.8 Lakh / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Brand/MakeInnovative FlexoTech Pvt.Ltd.
    Design TypeStandard

    Recovery Volume : 80

    Power Consumption : 220v AC, 5.65Kw

    Dia Thermic Oil : 33 kg.

    Machine Dimension Machine Body : 1300mm x 880mm x 1300mm

    Recovery Rate : 85%


    Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Ahmedabad
  • Production Capacity: 100
  • Delivery Time: 4 Weeks
  • Packaging Details: Wooden Crates, Export Packaging
  • Yes! I am Interested

    Solvent Distillation Machine

    REQUEST CALLBACK

    Approx. Rs 9.5 Lakh / Unit(s)Get Latest Price

    Special Features Flexo 30L-RHB Solvent Distillation Unit For photo polymer flexo plates.

    A. General description: 30L-RHB
    is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:
    Recovery volume :30 liters
    Power consume : 220V 3. 65kw
    Diathermic oil : 20 KG
    Machine dimension : 960x 610x 9400 mm
    Main body Recovery rate : 85%

    C. Operating steps:
    After opening the crate, plug in 220 V power, and connect the ground (earth). Open the lid and fill the tank up to the level with solvent to be recovered (30 L).Close the lid and tighten it.Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1). Set up the thermostat (18) for example for Perc. Is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure (3) high at 0. 03 Mpa / low at 0. 01mpa, and steam cooling fan thermostat (11) at 40 degree C. Turn on the power switch (15) , steam cooling switch (16) , heater switch (17) and vacuum pump switch (12). If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

    D. Important:
    Install the unit in a wide and ventilated place. Disconnect electric power before doing any action.No taking off the control panel. Change the diathermic oil every 1000 working hours. No filling the solvent container up over the level (30 liters). Remove the waste after every recovery


    Yes! I am Interested

    Solvent Distillation Machine

    REQUEST CALLBACK

    Approx. Rs 9.5 Lakh / Unit(s)Get Latest Price

    Special Features Solvent Recovery Unit For photo polymer flexo plates.

    A. General description: 30L-RHB
    is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:
    Recovery volume :30 liters
    Power consume : 220V 3. 65kw
    Diathermic oil : 20 KG
    Machine dimension : 960x 610x 9400 mm
    Main body Recovery rate : 85%

    C. Operating steps:
    After opening the crate, plug in 220 V power, and connect the ground (earth). Open the lid and fill the tank up to the level with solvent to be recovered (30 L).Close the lid and tighten it.Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1). Set up the thermostat (18) for example for Perc. Is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure (3) high at 0. 03 Mpa / low at 0. 01mpa, and steam cooling fan thermostat (11) at 40 degree C. Turn on the power switch (15) , steam cooling switch (16) , heater switch (17) and vacuum pump switch (12). If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

    D. Important:
    Install the unit in a wide and ventilated place. Disconnect electric power before doing any action.No taking off the control panel. Change the diathermic oil every 1000 working hours. No filling the solvent container up over the level (30 liters). Remove the waste after every recovery


    Additional Information:

  • Item Code: Flexo-30L-RH

  • Yes! I am Interested

    Solvent Recycling Machine

    REQUEST CALLBACK

    Approx. Rs 4.5 Lakh / Unit(s)Get Latest Price

    Special Features Flexo 30L-RHB Solvent Recovery Unit For photo polymer flexo plates.

    A. General description: 30L-RHB
    is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:
    Recovery volume :30 liters
    Power consume : 220V 3. 65kw
    Diathermic oil : 20 KG
    Machine dimension : 960x 610x 9400 mm
    Main body Recovery rate : 85%

    C. Operating steps:
    After opening the crate, plug in 220 V power, and connect the ground (earth). Open the lid and fill the tank up to the level with solvent to be recovered (30 L). Close the lid and tighten it.Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe
    (1). Set up the thermostat (18) for example for Perc. Is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure (3) high at 0. 03 Mpa / low at 0. 01mpa, and steam cooling fan thermostat (11) at 40 degree C. Turn on the power switch (15) , steam cooling switch (16) , heater switch (17) and vacuum pump switch (12). If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

    D. Important:
    Install the unit in a wide and ventilated place. Disconnect electric power before doing any action.No taking off the control panel. Change the diathermic oil every 1000 working hours. No filling the solvent container up over the level (30 liters). Remove the waste after every recovery


    Yes! I am Interested

    Solvent Recycling Machine

    REQUEST CALLBACK

    Approx. Rs 4.5 Lakh / Unit(s)Get Latest Price

    Special Features Flexo 30L-RHB Solvent Recovery Unit For photo polymer flexo plates.

    A. General description: 30L-RHB
    is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:
    Recovery volume :30 liters
    Power consume : 220V 3. 65kw
    Diathermic oil : 20 KG
    Machine dimension : 960x 610x 9400 mm
    Main body Recovery rate : 85%

    C. Operating steps:
    After opening the crate, plug in 220 V power, and connect the ground (earth). Open the lid and fill the tank up to the level with solvent to be recovered (30 L).Close the lid and tighten it.Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1). Set up the thermostat (18) for example for Perc. Is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure (3) high at 0. 03 Mpa / low at 0. 01mpa, and steam cooling fan thermostat (11) at 40 degree C. Turn on the power switch (15) , steam cooling switch (16) , heater switch (17) and vacuum pump switch (12). If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

    D. Important:
    Install the unit in a wide and ventilated place. Disconnect electric power before doing any action.No taking off the control panel. Change the diathermic oil every 1000 working hours. No filling the solvent container up over the level (30 liters). Remove the waste after every recovery


    Yes! I am Interested

    Solvent Recycling Machine

    REQUEST CALLBACK

    Approx. Rs 4.5 Lakh / Unit(s)Get Latest Price

    Special Features Flexo 30L-RHB Solvent Recovery Unit For photo polymer flexo plates.

    A. General description: 30L-RHB
    is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:
    Recovery volume :30 liters
    Power consume : 220V 3. 65kw
    Diathermic oil : 20 KG
    Machine dimension : 960x 610x 9400 mm
    Main body Recovery rate : 85%

    C. Operating steps:
    After opening the crate, plug in 220 V power, and connect the ground (earth). Open the lid and fill the tank up to the level with solvent to be recovered (30 L).Close the lid and tighten it.Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1). Set up the thermostat (18) for example for Perc. Is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure (3) high at 0. 03 Mpa / low at 0. 01mpa, and steam cooling fan thermostat (11) at 40 degree C. Turn on the power switch (15) , steam cooling switch (16) , heater switch (17) and vacuum pump switch (12). If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

    D. Important:
    Install the unit in a wide and ventilated place. Disconnect electric power before doing any action.No taking off the control panel. Change the diathermic oil every 1000 working hours. No filling the solvent container up over the level (30 liters). Remove the waste after every recovery


    Yes! I am Interested

    Solvent Recycling Machine

    REQUEST CALLBACK

    Approx. Rs 4.5 Lakh / Unit(s)Get Latest Price

    Special Features Flexo 30L-RHB Solvent Recovery Unit For photo polymer flexo plates.

    A. General description: 30L-RHB
    is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:
    Recovery volume :30 liters
    Power consume : 220V 3. 65kw
    Diathermic oil : 20 KG
    Machine dimension : 960x 610x 9400 mm
    Main body Recovery rate : 85%

    C. Operating steps:
    After opening the crate, plug in 220 V power, and connect the ground (earth). Open the lid and fill the tank up to the level with solvent to be recovered (30 L).Close the lid and tighten it.Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1). Set up the thermostat (18) for example for Perc. Is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure (3) high at 0. 03 Mpa / low at 0. 01mpa, and steam cooling fan thermostat (11) at 40 degree C. Turn on the power switch (15) , steam cooling switch (16) , heater switch (17) and vacuum pump switch (12). If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

    D. Important:
    Install the unit in a wide and ventilated place. Disconnect electric power before doing any action.No taking off the control panel. Change the diathermic oil every 1000 working hours. No filling the solvent container up over the level (30 liters). Remove the waste after every recovery


    Yes! I am Interested

    Solvent Recycling Machine

    REQUEST CALLBACK

    Approx. Rs 4.5 Lakh / Unit(s)Get Latest Price

    Special Features Flexo 30L-RHB Solvent Recovery Unit For photo polymer flexo plates.

    A. General description: 30L-RHB
    is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

    B. Technical information:
    Recovery volume :30 liters
    Power consume : 220V 3. 65kw
    Diathermic oil : 20 KG
    Machine dimension : 960x 610x 9400 mm
    Main body Recovery rate : 85%

    C. Operating steps:
    After opening the crate, plug in 220 V power, and connect the ground (earth). Open the lid and fill the tank up to the level with solvent to be recovered (30 L).Close the lid and tighten it.Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1). Set up the thermostat (18) for example for Perc. Is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure (3) high at 0. 03 Mpa / low at 0. 01mpa, and steam cooling fan thermostat (11) at 40 degree C. Turn on the power switch (15) , steam cooling switch (16) , heater switch (17) and vacuum pump switch (12). If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

    D. Important:
    Install the unit in a wide and ventilated place. Disconnect electric power before doing any action.No taking off the control panel. Change the diathermic oil every 1000 working hours. No filling the solvent container up over the level (30 liters). Remove the waste after every recovery


    Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Innovative Flexotech Pvt. Ltd
    Alpesh Thakar (Director)
    435, Patel Avenue, Near Gurudwara Thaltej,
    Ahmedabad - 380059, Gujarat, India
    Call Us: 
    Call Response Rate: 57%
    Share Us :
    F G T L



    Home  |   Profile   |  Product Range  |  Site Map  |   Contact Us   |   Mobile Site

    © Innovative Flexotech Pvt. Ltd. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Innovative Flexotech Pvt. Ltd